mlzd Architekten – ZHAW Campus – Winterthur
Auf dem Areal Technikumstraße in Winterthur wird die School of Engineering der ZHAW in vier Bauetappen zu einem Campus ausgebaut.
Im Rahmen des Wettbewerbs war ein Vorschlag für den Neubau zweier Laborbauten sowie für die Freiraumgestaltung des Außenbereichs einschließlich eines Parks zu erarbeiten. Mit den Laborneubauten soll das Raumangebot der School of Engineering (SoE) der zukünftigen Anzahl von Studierenden sowie den betrieblichen Anforderungen entsprechend erweitert und optimiert werden. Das Raumprogramm umfasst Bereiche für Lehre, Forschung & Entwicklung sowie Verpflegung und Lager. Ziel der Laborneubauten ist eine räumliche Konzentration der Institute und Zentren mit hoher technischer Infrastruktur von heute ca. 12’700m2 HNF auf neu 14’800m2 HNF.
Unter anderem waren für die Neubauten folgende Zielsetzungen zu berücksichtigen. Die Umsetzung der im Masterplan definierten qualitätssichernden städtebaulichen und architektonischen Parameter und damit die Schaffung einer identitätsstiftenden Wirkung der Bauten unter Berücksichtigung der zu erzielenden Gesamtwirkung des Campus T. Die Schaffung von bedürfnisgerechten räumlichen Strukturen mit der nötigen Nutzungsflexibilität, um den wechselnden Anforderungen eines Hochschulbetriebs auch mittel- bis langfristig gerecht zu werden. Die Widerspiegelung des Innovations- und Vorbildcharakters der SoE im Bereich Energie und Umweltforschung durch Architektur, Energiekonzept und Gebäudetechnik. Die Einhaltung des Kostenrahmens von 180 bis 220 Mio. CH. (BKP 1 bis 6 inkl. MWST und Honorare) für die Umsetzung der ersten Etappe Campus T und Reduktion der Gesamtkosten der Nutzung über den gesamten Lebenszyklus. Die Erstellung von Bauten, welche neben den deklarierten Anforderungen an die Wirtschaftlichkeit auch ökologisch und sozial nachhaltig sind.
Um einen sowohl programmatisch als auch strukturell bedingten Inselcharakter des Hochschul-Campus zu verhindern, verweben sich die Neubauten durch vielfältige Beziehungen mit dem umgebenden städtischen Geflecht. Die zwei Laborneubauten sollen städtebaulich möglichst kompakt und gedrückt in Erscheinung treten. Sie reagieren auf die Höhen des Bestandes und erzielen eine bessere Einbindung in die unmittelbare Umgebung. Resultierend aus der Setzung der zwei Baukörper ergibt sich innerhalb des Areals eine bewusst inszenierte, außenräumliche Zweiseitigkeit, welche eine klare Funktionszuweisung erlaubt. Westlich der Volumen entsteht ein Grünraum, in Form eines Campus-Parkes mit den Campus-internen Durchwegungen und Platzflächen zu den Hauptzugängen der zwei Gebäude, sowie der Zugang der Mensa. Der Park realisiert außerdem ein neu geschaffener Zugang zur topografisch tiefer gelegenen Eulach. Ostseitig der befindet sich die Erschließung für Radfahrer, Autos sowie Lieferverkehr. Die zwei Laborneubauten sind in ihrer äußeren Erscheinung, Gebäudehöhe, Fassadenraster und Materialität und Transparenz, gleich konzipiert. Ein großzügiges, zweigeschossiges Foyer empfängt die Gebäudenutzer und kommuniziert eine klare Adresse gegen Außen. Das Foyer mit Bezug zum Außenraum, kann als Raum für Veranstaltungen und Präsentationen optimal genutzt werden. Durch raumhohe verschiebbare Fassadentore wird die klare räumliche Trennung zwischen Innen und Aussen verwischt und aufgeweicht. Das größere Volumen ist als Hoftypologie entworfen. Der Innenhof mit seinen Passerellen übernimmt dabei die wichtige gesellschaftliche und klimatische Aufgaben und schafft einen informellen Weg durch alle Geschosse und Abteilungen. Sie ermöglichen eine spektakuläre Erfahrbahrkeit des Hofraumes mit mannigfaltigen Blickbeziehungen und schafft unkomplizierte Übergänge zwischen den Geschossen und ermöglicht und auch ein zwangsloser, abteilungsinterner Mitarbeiteraustausch wird begünstigt.
Loomn hat als professionelle Agentur für Architekturvisualisierungen mehrere Bilder zur Veranschaulichung der Entwürfe erstellt. So konnten besonders die eindrucksvollen Lichtströme durch das Gebäude präsentiert werden. Die Jury konnte sich so ein detailliertes Bild machen, wie das Gebäude aussehen würde. Die eingefügten Personen, Pflanzen und Lichteffekte tragen ebenfalls dazu bei, dass Projekt zum Leben zu erwecken.
On the Technikumstrasse site in Winterthur, the School of Engineering of the ZHAW is being expanded into a campus in four construction stages. As part of the competition, a proposal for the construction of two new laboratory buildings and for the design of the outdoor area, including a park, was to be developed. The new laboratory buildings are intended to expand and optimize the space available at the School of Engineering (SoE) in line with the future number of students and operational requirements. The space program includes areas for teaching, research & development, and food service and storage. The aim of the new laboratory buildings is a spatial concentration of the institutes and centers with a high technical infrastructure from today’s approx. 12’700m2 HNF to a new 14’800m2 HNF.
Among other things, the following objectives had to be taken into account for the new buildings. The implementation of the quality-assuring urban planning and architectural parameters defined in the master plan and thus the creation of an identity-forming effect of the buildings, taking into account the overall effect of Campus T that is to be achieved. The creation of spatial structures that meet needs with the necessary flexibility of use to meet the changing requirements of a university operation, even in the medium to long term. The reflection of the SoE’s innovative and exemplary character in the field of energy and environmental research through architecture, energy concept and building technology. The adherence to the cost framework of 180 to 220 million CH. (BKP 1 to 6 incl. VAT and fees) for the implementation of the first stage Campus T and reduction of the total costs of use over the entire life cycle. The creation of buildings that are ecologically and socially sustainable in addition to the declared requirements for economic efficiency. In order to prevent an island character of the university campus, both programmatically and structurally, the new buildings interweave with the surrounding urban fabric through a variety of relationships. The two new laboratory buildings should appear as compact and pressed as possible in terms of urban development. They react to the heights of the existing buildings and achieve a better integration into the immediate surroundings. As a result of the positioning of the two buildings, a deliberately staged, external two-sidedness results within the area, which allows a clear allocation of functions. To the west of the volumes, a green space is created in the form of a campus park with the campus-internal passageways and plazas to the main entrances of the two buildings, as well as the entrance to the refectory. The park also realizes a newly created access to the topographically lower Eulach. On the east side of the is the access for cyclists, cars as well as delivery traffic. The two new laboratory buildings are identical in their external appearance, building height, façade grid and materiality and transparency. A spacious, two-story foyer welcomes the building users and communicates a clear address to the outside. The foyer with reference to the outside space, can be optimally used as a space for events and presentations. Through floor-to-ceiling sliding façade doors, the clear spatial separation between inside and outside is blurred and softened. The larger volume is designed as a courtyard typology. The courtyard with its passerelles takes over the important social and climatic functions and creates an informal path through all floors and, departments. They enable a spectacular experience of the courtyard space with manifold view relations and create uncomplicated transitions between the floors and enables and also favors an uncoerced, intra-departmental exchange of employees.
Loomn, as a professional architectural visualization agency, created several 3D- images to illustrate the designs. This allowed the impressive light flows through the building to be presented in particular. The jury was thus able to get a detailed picture of how the building would look. The inserted people, plants and lighting effects also help to bring the project to life.